At Moore Timber Co., our firewood logs from Moray are typically cut to a standard length of approximately 6 to 10 inches. This size fits most wood-burning stoves and fireplaces commonly used in homes across the region. If you have a specific log size requirement, feel free to contact us before ordering—we’re happy to help accommodate your needs whenever possible.

While wooden pallets may seem like a convenient fuel source, they are not recommended as firewood, especially for indoor use. Many pallets are treated with chemicals, paint, or preservatives that can release harmful toxins when burned. In addition, nails or metal fasteners left in the wood can damage your stove or chimney.

For a clean, safe, and efficient burn, it’s always best to choose seasoned or kiln-dried firewood—like the hardwood and softwood logs. These are specifically processed for home heating and meet the necessary moisture and safety standards.

Yes, firewood can be too dry, although it's rare with naturally seasoned or kiln-dried logs. Wood with a moisture content below 10% can burn too quickly, producing a fast, intense flame but little lasting heat. It may also cause your fire to burn inefficiently, requiring more frequent refuelling.

The ideal moisture level for firewood from Moray—and anywhere else—is between 15% and 20%, which ensures a clean, efficient burn with good heat output. At Moore Timber Co., all our seasoned and kiln-dried logs are carefully moisture-tested to stay within this range, giving you the best performance in your stove or fireplace.

Yes, firewood can get wet if it’s not properly stored or protected from rain and moisture. When firewood absorbs water, its moisture content rises, making it harder to ignite and causing it to burn inefficiently with more smoke and less heat. Wet logs can also contribute to creosote buildup in your chimney, which increases the risk of fire hazards.

That’s why it’s important to store your firewood in a dry, well-ventilated area—ideally off the ground and covered with a breathable tarp or in a log store. At Moore Timber Co., we supply seasoned and kiln-dried firewood that’s moisture-tested and ready to burn, but keeping it dry at home is essential for top performance. We can provide sawn timber for you to build your perfect log store!

Yes, firewood can get rained on, but it’s not ideal. Occasional light rain on seasoned or kiln-dried logs isn’t a major issue if they dry out quickly afterward. However, repeated or prolonged exposure to rain can raise the moisture content, making the firewood harder to light, less efficient to burn, and more likely to produce smoke and tar.

To protect your firewood in Moray, always store it in a sheltered, well-ventilated area—preferably off the ground and covered on top, while allowing air to circulate from the sides. At Moore Timber Co., we deliver ready-to-burn firewood, but proper storage after delivery ensures it stays dry and performs at its best.

Firewood doesn’t really “expire,” but it can become too old to burn efficiently if it’s not stored correctly. Over time, poorly stored logs may become overly dry, crumbly, or even start to rot—especially if exposed to moisture, pests, or fungi. Rotten or degraded firewood produces less heat, may smoke excessively, and can be difficult to light.

Properly seasoned and stored firewood—like the hardwood and softwood we supply at Moore Timber Co.—can last for several years and still burn effectively. To ensure longevity, keep your firewood off the ground, protected from rain, and well-ventilated. Well-maintained logs will always be ready to provide clean, efficient warmth when you need it.

Yes, firewood can be stored in a garage, and it’s often a convenient option—especially during the colder months in Moray. However, proper ventilation is key. Storing firewood in a completely enclosed, damp, or unventilated space can trap moisture and cause mold or rot, even in seasoned or kiln-dried logs.

If you store your firewood in a garage, make sure it’s stacked off the ground on a pallet or rack, with good airflow around the logs. Avoid placing the wood directly against walls to prevent moisture buildup.

The time it takes for firewood to dry out depends on the type of wood, how it’s split, and the local climate in Moray. On average, softwood takes around 6–12 months to season properly, while hardwood can take 12–24 months to reach the ideal moisture content of 20% or less for burning.

To speed up the drying process, firewood should be:

• Split into smaller pieces

• Stacked in a well-ventilated area

• Kept off the ground and covered on top, but open on the sides

At Moore Timber Co., we take care of the drying process for you. Our seasoned and kiln-dried firewood in Moray is already moisture-tested and ready to burn, saving you time and effort while ensuring clean, efficient heat for your home.

The amount of firewood you need depends on several factors, including how often you use your fireplace or stove, the size and insulation of your home, and whether you're burning hardwood or softwood.

As a general guide for homeowners in Moray:

• Occasional use (1–2 fires per week): ~1 bulk bag per winter season

• Regular use (3–4 fires per week): ~2–3 bulk bags

• Daily heating (main heat source): ~4–6 bulk bags or more, depending on efficiency

Hardwood logs last longer and provide more heat per load, making them more efficient for frequent use. Softwood burns faster and is ideal for quick heat or mild weather.

At Moore Timber Co., we’re happy to help you estimate how much firewood you’ll need based on your setup and lifestyle—just give us a call or drop us a message for personalised advice.

The amount of firewood you need for winter depends on how often you use your fireplace or stove, the size of your home, insulation quality, and whether you're burning hardwood or softwood. For most homes in Moray, here's a general guideline:

• Occasional use (1–2 fires per week): ~1 bulk bag for the season

• Regular use (3–4 fires per week): ~2–3 bulk bags

• Daily use (main heating source): ~4–6 bulk bags or more

Hardwood logs are ideal for winter as they burn hotter and longer, reducing the total volume needed compared to softwood. To ensure consistent heat all season, it’s best to stock up before the cold sets in.

At Moore Timber Co., we offer high-quality seasoned and kiln-dried firewood from Moray, moisture-tested and ready to burn—perfect for staying warm all winter long. Need help estimating your winter supply? Just give us a call and we’ll be happy to assist.

Firewood "pops" when pockets of moisture or sap inside the wood heat up and burst during burning. Softwoods like larch, pine, fir, and spruce tend to pop and crackle the most due to their higher resin content. While this can create a cosy and nostalgic campfire atmosphere, it also means more sparks—so it’s best used outdoors or in fireplaces with proper screens.

If you're looking for a quieter, cleaner burn indoors, seasoned hardwoods such as ash, oak, or beech are a better choice. At Moore Timber Co., we supply both softwood and hardwood firewood in Moray, so you can choose what suits your setup—whether it’s for an indoor stove or a crackling firepit under the stars.

Hardwoods burn the longest, thanks to their dense structure and lower sap content. Species like oak, ash, beech, and hornbeam are known for providing long, steady heat with minimal smoke and fewer sparks. These woods are ideal for wood-burning stoves, open fires, and overnight heating.

In comparison, softwoods like pine or spruce ignite quickly and burn faster, making them better for kindling or short fires—but not for long-lasting heat.

At Moore Timber Co., we supply high-quality seasoned hardwood firewood from Moray, carefully moisture-tested to ensure optimal burn time, heat output, and efficiency. If you’re looking to reduce refuelling and stay warmer for longer, hardwood is the way to go.

The best-burning firewood is dense, well-seasoned hardwood with low moisture content—ideally between 15% and 20%. Woods like oak, ash, beech, and birch are top performers. They burn hotter, longer, and cleaner than softwoods, making them perfect for stoves, fireplaces, and log burners.

The key factors that make firewood burn well include:

• Low moisture – dry logs ignite easier and produce more heat

• High density – hardwoods offer longer burn times and better efficiency

• Proper seasoning – seasoned or kiln-dried wood burns cleaner with less smoke

At Moore Timber Co., we supply premium hardwood firewood in Moray, all carefully processed, moisture-tested, and ready to burn. Whether you're heating your home or enjoying a cosy fire, our firewood gives you reliable, efficient warmth every time.

The best firewood depends on your specific needs, but in general, seasoned or kiln-dried hardwoods are considered the top choice for heat efficiency, burn time, and clean combustion. Woods like oak, ash, beech, and birch are ideal for wood-burning stoves, fireplaces, and log burners.

These hardwoods are:

• Dense and long-burning

• Low in sap and resin

• Less likely to produce smoke or creosote

• Perfect for steady, reliable heat

For quick-start fires or outdoor use, softwoods like pine or spruce can also be useful due to their fast ignition—though they burn more quickly and with more popping.

At Moore Timber Co., we offer both hardwood and softwood firewood from Moray, all moisture-tested and ready to burn. Whether you're heating your home or preparing for winter, we help you choose the best firewood for your needs.

Well-seasoned or kiln-dried hardwoods smoke the least when burned, especially woods like oak, ash, and beech. These dense, low-sap woods produce a clean, efficient burn with minimal smoke—ideal for indoor fireplaces, stoves, and log burners.

To minimise smoke, your firewood should:

• Have a moisture content of 20% or less

• Be properly seasoned for at least 12–24 months, or kiln-dried

• Be stored in a dry, well-ventilated area

Green or unseasoned wood, especially softwoods like pine, can release excessive smoke due to high moisture and sap content.

At Moore Timber Co., we supply moisture-tested, ready-to-burn hardwood firewood from Moray, ensuring your fires burn hot and clean with as little smoke as possible—perfect for a healthier home and a better heating experience.